This one's a doozy. Spring break was crazy productive, so I'm breaking my progress down day by day to fully explain and showcase everything I've done.
Friday, 3/7/14
I have implemented a skybox into the scene to increase the immersion, as well as textured a sphere with a cloud map and added a rotation animation to it to simulate moving clouds. Additionally, I have baked a lightmap for the terrain to allow for smoother shadows and to reduce the hit it normally takes on performance. At any given time, the scene contains 1000 trees that are being rendered as 3D objects; I will probably lower this more as I optimize for performance. By baking the lightmap, static objects will no longer cast real-time shadows, thus saving quite a bit of performance power.
Saturday, 3/8/14
I began creating the hospital, which is the main environment for the demo I am producing. I am using a floor plan I found online as reference.
 |
| Referenced floor plan |
After importing the above image into Revit, I began to setup the exterior walls with a custom structure: brick exterior and laminate interior. I then began dividing the west wing into individual rooms before deciding to create the curtain wall in the northeast corner.
 |
| Some interior walls and curtain wall |
I then completed the remaining interior walls and built a tiled floor for the entire first level.
 |
| First floor completed |
Then added some windows, columns for the entrance walkway and curtain walls for the lobby and courtyard.
 |
| Windows, columns, curtain walls |
Finally, I created custom doors and placed them throughout the hospital. These allowed me to place them with varying degrees of openness: closed, 45 degrees, or 90.
 |
| Doors |
Sunday, 3/9/14
Next were building handrails and placing them throughout the patient wings.
 |
| Close-up of railings |
 |
| Perspective view at this stage. |
I then created a floor on the second level, extended the exterior walls up, placed windows and built the roof. I also created a ceiling for both floors. This would be necessary for later details.
From here, I modified the curtain walls at the entrance to have glass doors and adjusted the mullions to be at the proper height.
I ended the day by bringing the model into 3ds Max and recreating some of the materials using the "Standard" material. Revit uses Autodesk Materials, which most other software packages cannot understand. Fortunately, 3ds Max does, so I opened up each material and did my best to recreate the same effects using Standard materials. This would allow me to bring a single FBX file into Unity with the materials embedded.
I brought the model into Unity and found the materials worked well, so that would be my workflow. For now.
Monday, 3/10/14
I began the day with duplicating the first floor assets up to the second floor to start to populate it. I added/removed some windows to add some variety.
I then created the concrete slab to cover the walkway into the hospital, then used the same technique from Saturday to create a second curtain wall on the north side of the hospital.
 |
| Enclosed building |
From there, I grabbed a few components from RevitCity.com, namely a shower/tub combo, a toilet/sink unit, and a hospital bed. I placed either one or two beds in each patient room, depending on the size, and a toilet/sink unit and shower/tub combo in every bathroom that could fit them.
 |
| Patient room |
I then cut out a section of the second level floor in two places, moved some walls and created two staircases, one in each wing. I adjusted some of the materials to have wood steps and laminate risers with chrome railings.
 |
| Curtain wall and stairs in the west wing |
Tuesday, 3/11/14
At this point, I began the incredibly long and tedious process of placing the lighting in each and every room in the hospital. Below is a screenshot of what was involved in properly placing each one.
 |
| This was fun |
I had to setup dimension constraints on every light and the interior face of the room's walls the appropriately space them.
Wednesday, 3/12/14
Day 2 of the light endeavor. The hospital ended up requiring a total of 690 lights to properly illuminate the entire space. Fortunately, I could duplicate almost all of them up to the second floor, so I only manually placed between 350 and 400.
I needed to make a few final adjustments to the curtain wall system to make the doors the proper dimensions and to line up all the mullions with each other.
I then placed chairs in each patient room, setup a waiting room on the first floor and lounge on the second, as well as a few offices and conference rooms with basic furnishings.
 |
| Semi-furnished hospital with interior lights |
Thursday, 3/13/14
This was spent mostly on final touch ups and renders. Fortunately, I happen to be looking on Autodesk's website and discovered that they have free cloud rendering for students using Revit. I was able to upload my file to their server and have it render the different views for me.
 |
| Patient room |
 |
| Waiting room (Night) |
 |
| Walkway (Night) |
 |
| Stairwell (Night) |
 |
| Waiting room (Day) |
 |
| Walkway (Day) |
 |
| Stairwell (Day) |
 |
| Semi-finished hospital (Day) |
What's Next?
At this point, my next step is to bring the model into the scene in Unity so that the player can explore it. That involves me finalizing textures in 3ds Max and probably creating some within Unity as well. Additionally, it will require that I level out the terrain and remove the trees and grass in that area. From there, I will create a few more elements outside of the hospital to bring it all together, e.g. a road, sidewalk, parking lot, courtyard, etc... Whether those will be implemented before or after the draft of my pitch has yet to be determined and will be based off on the amount of time I can devote to it.
No comments:
Post a Comment